I have just put an sonnet ata100 into my 9600:g3/450, and use a new ide drive as the boot disk. I want to take the old scsi discs out of the machine and replace them with ide - actually I will put the old drives in my daughters 7600 I think. Anyway a couple of questions regarding this. 1) How do I turn off sharing so that I can erase the disks. I have tried <get info> and changing the privileges, but that does not seem to work. 2) when I pull the drives out, do I have to terminate that scsi connection, and if so how do I do that.
report on the process : the card installed easily and the disk - a 60gb maxtor - works perfectly. I partitioned it into 3 20gb partitions and all appear normal. I should have gone this way ages ago. Thanks Tim Roberts -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
