At 11:25 PM -0500 01/25/2003, Kevin Willis wrote:
>  What is the difference between a router and a hub?

A router intelligently moves packets from one network (circuit) to 
another.  Home/Office-type Routers often perform other services too, 
such as NAT (ip spoofing), basic firewall (packet filtering), DNS 
Forwarding, DHCP, etc.

A hub is like an electrical octopus, a dumb device that simply echos 
everything that comes into it back onto every one of its ports.

A switch is an intelligent hub.  It does the same thing as a hub, but 
the packets are sent only to the interface to which they're 
addressed.  Switches are typically a lot faster (support higher 
throughput) and more expensive than hubs.


>Right now I have a 4 port router with 4 computers attached.  They 
>all share a DSL connection.  I need more ports and was looking at a 
>couple of things with 8 ports.  I am not sure if they are routers or 
>hubs though (they are used).

Check to make sure your router supports more than 4 computers.  Some 
routers are limited in the number of IP addresses they will talk to. 
If that's not a problem, then just get either a hub or a switch and 
attach its uplink port to one of the ports on your router.  Kindof 
daisy-chaining two power strips...

- Dan.

-- 
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Sonnet & PowerLogix Upgrades - start at $169   |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:   <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:   <mailto:[EMAIL PROTECTED]>
For digest mode, email:  <mailto:[EMAIL PROTECTED]>
Subscription questions:  <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to