In a message dated 3/1/03 7:49:35 AM, [EMAIL PROTECTED] writes: << Inside the 7600 right now is the original 1GB drive. I'd like to keep that in there for backup and use the 9GB IBM as the main drive. Will I also have to purchase cables, brackets, sled, etc? >>
The bay under the standard hard drive will accommodate a 1.6" drive. The SCSI cable should already have the necessary extra "head" as that would be required for the optional DDS tape or optional Zip, anyway. You may need a "Y" power cable. Sleds are easy to come by, but the upper sled and the bottom sled are not the same. You attach the sled to the drive using 6-32 UNC x 1/4" machine screws. The drive inserts from the front. Set the new HD to SCSI ID 1, as 0 and 3 are already in use. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
