Thanks for your note. Looks like I'll have to get a hard drive kit with the lower sled and screws for the 7600. I'll have to investigate your power cable idea, too.
Tate [EMAIL PROTECTED] wrote on 3/1/03 11:07 AM: > The bay under the standard hard drive will accommodate a 1.6" drive. The SCSI > cable should already have the necessary extra "head" as that would be > required for the optional DDS tape or optional Zip, anyway. You may need a > "Y" power cable. > > Sleds are easy to come by, but the upper sled and the bottom sled are not the > same. > > You attach the sled to the drive using 6-32 UNC x 1/4" machine screws. > > The drive inserts from the front. > > Set the new HD to SCSI ID 1, as 0 and 3 are already in use. > > -- -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
