I just installed the Max Power file. Before I installed it, System profiler showed the CPU running at 336 Mhz. Now Gauge Pro shows it running at 302 Mhz. I think I read that you can experiment with the Cache equation to improve performance. I think I set this at 3 to 1. I don't know if that is better than 1.5 to 1 or not. I am sure someone reading this does though. Any thoughts are appreciated.
> Good point about the G3 software. It depends on the card, some cards > have the speed configured in software, others don't. But all of them > need the software to enable the backside cache. As this is where the > G3 gets a lot of it's performance, it is important. > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
