>"A.Tuazon" <[EMAIL PROTECTED]> wrote: > >My problem: >In OS 9.1 or even 8.6, I am able to successfully format the ATA hard drive >and use it. However when I tried to install 9.1 on the ATA drive, it >installed it just fine BUT when I reboot using the ATA drive I keep getting >a system error (I believe error 10) right at the welcome screen. >Has anyone experienced this problem before? Does anyone know what an >error 10 is?
to which Roman Tarnovetsky replied: >The XLR8 zif carrier requires an emergency floppy for restarting in an >OS that's newly installed. The floppy is made using the XLR8 install CD. >If this is not available to you then try starting from an older volume >and then install the XLR8 control panel and xtention to the new OS. Rt > > Error 10 = dsLineFErr = Line 1111 trap error. Try setting the XLR8-carrier card's bus speed lower (say 40 MHz) and boot with extensions off. Install the cache enabling software and see to it that the motherboard's cache is disabled at startup, also disabling speculative processing. Trash ASLM, Finder, Mac OS, and System Preferences and restart. If you pass without incident move the card's bus speed higher a little at a time until crashing resumes, Backdown 1-2 MHz until the system remains stable. Charlie -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
