My Reply follows quote. On 22/08/2003 20:39 [EMAIL PROTECTED] said: >I just ran into a peculiar problem. I have a PM 6500/225 that will not >recognize my LaCie 2GB external hard drive. Every other Mac I have >(Color Classic, Classic II, SE/30, PM 8500 and IIfx) "sees" it during >startup and it works just fine. It doesn't matter if I have the >termination power on or off (selectable on the LaCie). Just to muddy the >waters a little more I have an original Apple external hard drive (850MB >and ) that IS recognized by the 6500 along with the rest of my stable. >Any ideas? Thanks! ----------- If the 6500 boots with the drive attached, have you tried something like "Mt Everything" to see if the drive is seen on the SCSI bus?
Ken -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
