Hi: I have a slight problem with my 1.4 Mb floppy disk drive. At least two refrigerator magnets were placed inside the floppy disk drive for at least a minimum of 24 hours. I removed them once I found out, probably too late. Then, I tried to boot up the PowerMac. Fortunately, it booted up with no problems. But when I tried to access the floppy drive, it would not read my disks, which the PowerMac 7500 could read beforehand.
So, I believe, the 5v Mitsubishi MF335F 2592MA floppy disk drive is lost. My problems are as follows: 1). How do I disconnect the floppy drive? 2). Is the connection removed from the disk drive or from the motherboard? 3). What can I use in it's place? Any suggestions would be greatly appreciated. David [EMAIL PROTECTED] -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
