> >Unless it is an SCA 80-pin drive the drive itself may be jumpered as >ID >No.4 so it takes precedence over the adaptor's SCSI ID settings. Did > >you mention if the drive's parity was enabled? > > > >Charlie > >OK. Maybe a little confusion here. The 68 pin LVD drive is jumpered as >SCSI ID #2. However, SCSI Probe and everything else I have tried shows >it as SCSI ID #4. Perhaps the jumpers are mislabelled, I don't know. >
Possibly a combination of 2 jumpers like 1 and 2 - #3, 0 and 2 = #4. But as long as you can use the drive for its intended purpose and there are no SCSI conflicts it shouldn't be a major concern. Charlie -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
