Hi Listers: I pulled the non-working drive out of my first 7500/100. So, I'll need a new floppy drive for the 7500/100.
I looked into the second 7500/100 that I received a while ago. I hooked up the second 7500/100 (mouse monitor and keyboard) fired it up and nothing appeared on the screen. I plugged in another monitor from another working Apple and nothing appeared on the screen. I double-checked that the monitor worked on the other 7500/100 and it fired up. So, what is up with the second 7500/100? Is it fixable or worth fixing? Should I pull the floppy drive from the second 7500/100 to see if it is operational and use the second for parts for the first? If the second isn't fixable, what can I pull off the second 7500/100, other than the floppy drive, that I could plug into the first 7500/100? I was rather looking forward the connect them together, through ethernet, with my 7200/90 (100 on the case, it's my fault). Can it still be done? David Harris [EMAIL PROTECTED] -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
