I recently purchased a used Newer Tech MaxPowr G3 upgrade card for my PM 9600. However, the card didn't come with the manual for it. This is a problem because I need to set the DIP switches on the card to match my 9600's bus speed and the card's speed multiplier.
The 9600 is a 50 Mhz bus, and the card is a 400 MHz G3. I'm hoping someone on this list has one of these cards, and has the manual, and can tell me what the correct DIP switch settings are for a 50 MHz bus and an 8x multiplier. This is NOT one of the ZIF carrier cards. This card has the CPU soldered to the card (but the card does install into the CPU slot on the 9600 replacing the 9600's original processor daughtercard). TIA -chris <http://www.mythtech.net> -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
