>>The 9600 is a 50 Mhz bus, and the card is a 400 MHz G3. >> >>I'm hoping someone on this list has one of these cards, and has the >>manual, and can tell me what the correct DIP switch settings are for a 50 >>MHz bus and an 8x multiplier. > >For non-Kansas: UP, UP, UP, UP > >For Kansas: UP, DOWN, DOWN, UP > >You cannot select a specific multiplier, nor can you select a specific >bus speed, unlike most of the ZIF carriers. > >I suspect that your NewerTech card will run at something line 399 MHz >with an 8.5 multiplier, and a 47 MHz bus speed.
That did it. The Kansas spec is what I needed. The card now works fine and my 9600 is cruising with a 400 MHz G3 Thanks!!! -chris <http://www.mythtech.net> -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
