A pair of ST19171Ws were pulled from a (failed*) Seagate AV professional external drive case attached to a 9600/200. After ID settings and termination adjustments as per the relevant Seagate web page, they were connected to the internal bus of the Adaptec SCSI card inside the 9600. One drive works fine, the second appeared once on Apple System Profiler but would not initialise or mount.
Does one of them have a Compaq part number, but have Seagate as its manufacturer?
How can one be absolutely certain that the second drive is beyond resuscitation?
I would connect it to another Mac.
* The unit used to show up on the desk top as a single 18 Gb drive (array?) but intermittently disappeared. Eventually it would not show up at all.
How can a pair of drives be configured to appear as a single drive?
FWB Raid Tool.
Thanks in advance.
Phil Wong
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
