Hi All need a bit of advice here. I have been doing a bit of cpu clocking with the help of the pages on LEM for reference.
I have managed to clock the bus speed of my 266 desktop up to 70mhz and also the cpu speed up to 315 mhz by changing the j16 block about . As a result the mac now runs at an idle temp of 26'c and seems to peak when browsing the web or writing letters at 31'c is this to hot for a G3 desktop. I know that if it were in a tower then I could just add a fan for cooling, but as it is not does anyone have any suggestions as to : A. do I need to worry about that sort of heat increase?. B. do I need extra cooling in a desktop?. C. What signs do I look for as to weather I should put the jumper block back to normal. System specs 384 ram 315 cpu 20gb hdd rev A ~rom running 9.2.2 very very stable not even a murmur yet and it has been on for nearly 24hrs non stop. Thanks Vicki -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
