Date: Thu, 19 Feb 2004 12:53:22 -0500 From: Fluxstringer <[EMAIL PROTECTED]> Subject: Re: [PCI] 7200 probs..
> But here's the problem.. I have the 8.1 update and a bunch of other>in.. Still no dice.. Any ideas?shareware software that I frequently use stored on my G3, so "No prob," I thought.. Just plug in the handy dandy ethernet cable and kick it across... Except for the fact that the 7200 doesn't think it has an ethernet port.. Undeterted I grabbed an Apple 10/100 PCI Ethernet card and slapped it
It sounds like you don't have a crossover cable and aren't using a hub (or switch). Without these things, I don't think you can select ethernet in the Appletalk control panel.
Once you connect the computers with a hub and a cat5 cable from each computer to the hub, you can choose ethernet in the Appletalk control panel. The you have to make sure file sharing is on, on the target computer, and Users and Groups is configured properly. Next, go into the chooser, click on Appleshare and the target computer should show up in the window. Enter your password, and voila, you're connected.
Good luck, Scott --
-------------------------------------------- Scott Gerber Design voice: (505) 466-9333 fax: (505) 466-3422 email: [EMAIL PROTECTED] address: 33 Alondra Road, Santa Fe, NM 87508
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
