I have a 7600/132 that I g4'd last year using a 450MHz Sonnet card. It works great and is very stable in 8.6, 9.1, 9.2 and X [though X needs tons of vram or it's somewhat of a dog]. It's worth noting that although the bus speed for the 7600/132 is 44MHz it is actually controlled by the processor daughter card. ie; if you change your 166MHz card for a 200MHz card you get a 50MHz bus speed as part of the upgrade. The same thing happens when you install a g3 or g4 card. You get a 50MHz bus speed. In fact, with the Maxpower g3 card you can tweak the bus speed even higher with the control panel they provide.
AL >>>>>>>> Does anyone know if there are any problems with running a G4 CPU upgrade on the PM 7300? What about running older software with the G4 upgrade card? -- vjamacaddict <<<<<<<< -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
