Hi folks, I just migrated a bunch of stuff from my 9500 to a 9600, including a G3 400 upgrade card from Formac, a usb card, the video card (now I have dual monitors) and two hard drives. Everything is up and running successfully, except for one problem. The drive that came in the 9600 is jumpered to ID 0 as is one of the drive I want to put in (the original drive from the 9500). I've no clue as to how to set the jumpers on one of the ID 0 drivesto ID 1 (the other drive is at ID 2 and the CD is at ID3).
The 9500 drive at ID 0 is a 1GB IBM and the 9600 drive at ID0 is a Seagate 4 GB. Any thoughts on how to set the jumpers? Thanks in advance, Steve Zerby __________________________________ Do you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam http://mail.yahoo.com -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
