On Saturday, March 13, 2004, at 10:45 AM, Steven Zerby wrote:
The 9500 drive at ID 0 is a 1GB IBM and the 9600 drive at ID0 is a Seagate 4 GB.
Any thoughts on how to set the jumpers?
The seagate will be easier to find the jumper settings for. Get the model number off the drive (something like ST15150) and look up the drive on Seagate's site www.seagate.com . It will have a good diagram on jumper settings, much easier than trying to find the info for the IBM drive.
HTH Len
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
