on 6/2/04 2:30 PM, PCI PowerMacs at [EMAIL PROTECTED] wrote: > > on 6/2/04 4:35 AM, nathan at [EMAIL PROTECTED] wrote: > >> >> Listers, >> >> I'm happy to report that I've somewhat fixed the problem of two drives >> in my Rev 3 G3/300 Gossamer Server.. However then fix entailed swapping the >> CD-Rom from It's own bus to a slave under my boot drive. >> So while I can see the second drive and have installed YDL 3.0.1 and can >> boot into it.. I've lost the ability to boot from my cdrom.. >> So any input on this issue would be appreciated.. As always, thanks to >> all that took the time to read my message and offer help.. >> >> -nathan >> > > > As long as the CD ROM remains a slave device, you won't be able to boot from > it. > > Jeff G
Hi all; The Beige G3 (Gossamer) has 2 ATA (IDE) busses on the logic board marked J9 and J10. The boot drive goes on J9 jumpered as "master". The CD goes on J10 jumpered as "master". Any other drive on the J10 cable should be jumpered as "slave". This works on my G3-DT 266 and my G3MT-300. According to our resident G3 expert Mr. PeterH., the J9 bus will not support 2 drives without a special cable. The CD must be set to master to boot from it. It's best to leave things as Apple had it when you add drives. If I got any of this wrong, I'm sure Peter will clarify. HTH --Thanks; Rev. George --Maranatha (means the Lord cometh) -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
