<< On a four wire Molex power lead, one red, two black, one yellow, is it 12 v red, 5v yellow, two black grounds? >>
Japan Molex is used on PeeCee floppies and on SCSI Zips, only. AMP Mate-N-Lock is used on everything else. Numbering for AMP is ... Pin 1 - +12 volts - Yellow Pin 2 - +12 volts return (same as ground) - Black Pin 3 - +5 volts return (same as ground) - Black Pin 4 - +5 volts - Red Numbering for Japan AMP is the reverse of the above ... Pin 1 - +5 volts - Red Pin 2 - +5 volts return (same as ground) - Black Pin 3 - +12 volts return (same as ground) - Black Pin 4 - +12 volts - Yellow Note that PeeCee and Mac power supplies have a -5 volts and a -12 volts, so the correct terminology for pins 2 and 3 are "returns" for their corresponding + voltages, NOT - voltage. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
