On Monday, August 29, 2005, at 02:30 PM, William Yam wrote:
I have a performa 6360 with a 1.2 gb hard drive and wanted to upgrade
to a
30 gb Maxtor hard drive pulled from a pc. When I started the system
with a
cd, the mac wouldn't recognize the drive in drive setup but I could
hear
that it was turned on. When I put the old drive back in, everything
was
fine. I also put the new drive back in the original pc and it worked
fine.
What could be the problem?
Sounds like a Jumper problem. Make sure the drive is set to Master,
many more modern drives are set to cable select.
HTH,
Len
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[email protected]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
