Peter,
The CPU is around 166 or so. And it is using SDRAM, since it currently
has a 128 and 64 Meg SDRAM simms already installed. The SDRAM installed
is PC100 buss speed.
Will try and take a look the next time I am over at his place, at the
start-up screen to see if I can figure out the manufacture of the board.
Thanks for the info about Sandra, since did not realize about the
program.
Ralph
Peter Kaulback wrote:
>
> >Ralph
>
> Ralph, this PII, what cpu is running in it? If it's below a 400mhz then
> it's likely running PC-66 dram which is more expensive then PC-100/133
> dram. When the system is rebooted you can see what board is in use on the
> POST screen, take that to the vendor as most vendor sites have archives for
> older and/or discontinued mobo's. Sandra can help you determine a lot
> about the board as well, download it here
> http://www.sisoftware.demon.co.uk/sandra/ for free. HTH
> Peter Kaulback
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
