In the wee hour of 07:32 AM 5/31/01 +0100, Virginia Da Costa bequeathed
such tales as these:
>The EPSON EPL-5200+ printer we have at school has started printing very
>very pale despite the addition of new toner. All the software settings are
>set to normal, or best (maximum ink), not draft or minimum, but the printed
>page comes out so light that you'd think the toner has run out. If we put
>in a new toner cartridge, the result is the same. The only solution offered
>by technical people is to buy a new printer, but we are only a small
>organisation and can't really afford it :-(
>
>I'm wondering whether there's any way of cleaning the printing head, or of
>otherwise improving performance in a laser printer.
>
>Hope some of you may have some suggestions. Thanks!
>
>borracha
Virginia, it sounds like you need to have the printer cleaned. Unless you
have done it before then I recommend you call in an expert to do it for
you. They are not cheap either, around 75.00 to 90.00 CDN per hour, but as
it is a laser this does have to be done from time to time. If you learn
how to do it then it's a great second income. HTH
Peter Kaulback
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
