Tried that already and it does not work. Win 2000 does not have the drivers and I need them to see the other hard drives I have on IDE 3 and 4..rich ----- Original Message ----- From: "Ben Moore" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 06, 2003 6:25 PM Subject: Re: PCWorks: ABIT BP6 Mother board
> Take a look at http://fae.abit.com.tw/eng/download/driver/i_intel_p3.htm#BP6 > . This is a BX board. Windows 2000 may have drivers for the Highpoint > controller built in. I'd install it and see. If you need them then install > the drivers from Abit's site. I'm assuming that you aren't booting from the > Highpoint controller. > > Ben Moore > > ----- Original Message ----- > From: "Richard Thomas" <[EMAIL PROTECTED]> > To: "pcworks" <[EMAIL PROTECTED]> > Sent: Thursday, March 06, 2003 8:38 PM > Subject: PCWorks: ABIT BP6 Mother board > > > > I do not know if anyone can help but here it is. I have the above > mentioned > > mother board in for reload of windows 2000 pro. This Board comes with 4 > IDE > > Ports for a total of 8 IDE devices. As far as I can tell it is not raid. > Any > > way I need the drivers for the second 4 IDE ports and I can not find them > > anywhere. Does anyone have a suggestion..rich ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
