Hi folks, I have obtained an Artec CD Writer CD-RW with "Just Link" technology. It is used and has no hardware or manuals, so I need a bit of advice from someone familiar with this writer. Most optical drives have 3 jumpers for setting the CSL / Master / Slave, but this drive has no jumpers installed, although it does have the jumper connectors. It also appears that instead of the usual CSL, Master, Slave settings, it has only two setting connectors with the middle missing, in this configuration : | : I assume it leaves out the CSL, but I don't know.
I want to install it as the Master drive on the secondary IDE connector, running under Win98 SE. The specs are: CD Writer 24x 10x 40x Model WRA - OA4O. Also, does WIN98 have the drivers in the database, or do I need to get the drivers? Roger ******** Time is the greatest teacher. Unfortunately it kills all its students." (Hector Berlioz) ================================================= ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
