Here is the Artec site (support). You may find what you need in the way of info there or at least a email address that you can ask.
http://64.70.234.121/pages/Support.htm You can get the manual here http://64.70.234.121/pages/Hardware_installation.htm Keith Thompson Roger wrote: > Hi folks, > > I have obtained an Artec CD Writer CD-RW with "Just Link" technology. It > is used and has no hardware or manuals, so I need a bit of advice from > someone familiar with this writer. Most optical drives have 3 jumpers for > setting the CSL / Master / Slave, but this drive has no jumpers installed, > although it does have the jumper connectors. It also appears that instead > of the usual CSL, Master, Slave settings, it has only two setting > connectors with the middle missing, in this configuration : | : > I assume it leaves out the CSL, but I don't know. > > I want to install it as the Master drive on the secondary IDE connector, > running under Win98 SE. > > The specs are: > CD Writer > 24x 10x 40x > Model WRA - OA4O. > > Also, does WIN98 have the drivers in the database, or do I need to get the > drivers? > > Roger > > ******** > Time is the greatest teacher. Unfortunately it kills all its > students." (Hector Berlioz) > -- Keith Thompson, Worthington, OH Home Web Page: http://freepages.family.rootsweb.com/~kthompson/ Genealogy Web Page: http://freepages.genealogy.rootsweb.com/~kthompson The solution to a problem changes the problem. ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
