If the Win98 PC is only for Internet sharing, go get a Wirless Cable DSL Router (NetGear). Connect the printer to anouther PC or get a NetGear print server (if the printer requires software to work, you cannot use that printer) or a wirless print server. You can get a wired one you can plug into (NetGear) your broadband router. A good wireless one will have 4 wired ports also. I think NetGear's one port print server is $80 - $100.
Thank you, Eric Vogel ----- Original Message ----- From: "Jorge D. Camboni" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 07, 2004 7:12 AM Subject: PCWorks: win98se wireless network > Hi everybody. I have 2 pcs with winxp and one with win98se > have also 2 uniden wireless 11mb usb adapters. > I managed to get networked (basic level) the 2 pcs with > winxp. Then, I tried with one with xp and the one w98se (that is my main one, > with broadband internet connection and printer) but the most I could get was > getting the 2 ones connected, no files sharing, nothing trasmitted from w98se > one to the other pc... the wireless adapters are just there, KNOW NOTHING > ABOUT NETWORKING, I can barely share some default folders (and nothing more) > with XP, nothing but staying connected with win98se. > Could use a lot of advice :o)) Thanks in advance > Jorge > > > Jorge Camboni, GY Electronics, Richardson, TX ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
