On Oct 5, 2011, at 4:05 AM, IOhannes m zmoelnig wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2011-10-03 18:48, Hans-Christoph Steiner wrote:
On Oct 3, 2011, at 5:06 AM, IOhannes m zmoelnig wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2011-10-02 22:27, Hans-Christoph Steiner wrote:
FYI:
http://autobuild.puredata.info/auto-build/2011-10-02/logs/2011-10-02_03.15.26_darwin_macosx105-i386_pd-extended.txt
hmm, i cannot reach this machine anymore...
Yeah, it seems to be down, I'll check it tomorrow.
thanks.
now that it is online again, i did a little test:
<snip>
macosx105-i386:~ pddev$ cd tmp/externals/
macosx105-i386:externals pddev$ make
/Users/pddev/tmp/externals/zexy/configure
grep: /Users/pddev/tmp/externals/loaders/pdlua/src/config.h: No such
file or directory
cd /Users/pddev/tmp/externals/zexy && ./autogen.sh
PATH:
/sw/bin:/Users/pddev/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/
bin:/usr/X11/bin
running autoreconf
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4
autoreconf: configure.ac: tracing
aclocal.m4:20: warning: this file was generated for autoconf 2.68.
You have another version of autoconf. It may work, but is not
guaranteed to.
If you have problems, you may need to regenerate the build system
entirely.
To do so, use the procedure documented by the package, typically
`autoreconf'.
configure.ac:5: error: Autoconf version 2.62 or higher is required
aclocal.m4:8945: AM_INIT_AUTOMAKE is expanded from...
configure.ac:5: the top level
autom4te: /usr/bin/gm4 failed with exit status: 63
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
aclocal.m4:20: warning: this file was generated for autoconf 2.68.
You have another version of autoconf. It may work, but is not
guaranteed to.
If you have problems, you may need to regenerate the build system
entirely.
To do so, use the procedure documented by the package, typically
`autoreconf'.
configure.ac:5: error: Autoconf version 2.62 or higher is required
aclocal.m4:8945: AM_INIT_AUTOMAKE is expanded from...
configure.ac:5: the top level
autom4te: /usr/bin/gm4 failed with exit status: 63
autoreconf: /usr/bin/autoconf failed with exit status: 63
make: *** [/Users/pddev/tmp/externals/zexy/configure] Error 63
macosx105-i386:externals pddev$ . /sw/bin/init.sh
macosx105-i386:externals pddev$ make
/Users/pddev/tmp/externals/zexy/configure
grep: /Users/pddev/tmp/externals/loaders/pdlua/src/config.h: No such
file or directory
cd /Users/pddev/tmp/externals/zexy && ./autogen.sh
PATH:
/sw/bin:/sw/bin:/sw/sbin:/Users/pddev/bin:/usr/bin:/bin:/usr/sbin:/
sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin
running autoreconf
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
libtoolize: copying file `m4/libtool.m4'
libtoolize: copying file `m4/ltoptions.m4'
libtoolize: copying file `m4/ltsugar.m4'
libtoolize: copying file `m4/ltversion.m4'
libtoolize: copying file `m4/lt~obsolete.m4'
autoreconf: running: /sw/bin/autoconf-2.68 --force
autoreconf: running: /sw/bin/autoheader-2.68 --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:6: installing `./config.guess'
configure.ac:6: installing `./config.sub'
configure.ac:5: installing `./install-sh'
configure.ac:5: installing `./missing'
src/Makefile.am: installing `./depcomp'
autoreconf: Leaving directory `.'
</snip>
this basically indicates, that zexy's autogen.sh is working fine, as
long as we have "Fink support" (by running: sourcing /sw/bin/init.sh)
actually, only /sw/bin has to be added to the PATH
the logfiles reveal that PATH is set to
/sw/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/
sw/bin:/sw/sbin
which seems to be OK but obviously isn't:
The logfile I see says its set to:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/sw/bin:/sw/sbin
http://autobuild.puredata.info/auto-build/2011-10-05/logs/2011-10-05_03.15.09_darwin_macosx105-i386_pd-extended.txt
Its set in run-automated-builder here:
# On Mac OS X, there are some handy things in Fink, but don't override
the
# built-in tools
PATH="${PATH}:/sw/bin:/sw/sbin"
export PATH
This is set like this so that we can ensure that Fink is not required
for building things that use autotools. Most Mac OS X users do not
have Fink, MacPorts, Brew, etc. installed, so things like libraries
really should build without Fink. Obviously, when talking about
libraries not included in Mac OS X, then Fink is required.
bummer #1: the leading /sw/bin is set in zexy's autogen.sh, but
actually
it is set too late (after AUTORECONF has been evaluated to
/usr/bin/autoreconf)) - indeed that was a difference between
puredata.git/autogen.sh and the one used in zexy :-)
fixed in current SVN, so zexy should build on OSX from now on
bummer #2: the path settings for building Pd-extended make sure that
fink installed replacements are only fallbacks for the system
installed
programmes. e.g. fink comes with autoconf-2.68 while the system comes
with autoconf-2.61; the path settings make sure that the older one
is used.
is there a compelling reason to append /sw/bin rather than to
prepend it
(as is done by /sw/bin/init.s)?
I don't really know what the issue here. This is why I generally
avoid autotools. They end up making a nice ./configure interface, and
the Makefile.am is quite nice, but often, you suffer way too much to
get there.
And don't forget, in every build, it runs ./autogen.sh && ./configure
in pd/ and that is working. Following that hunch, I copied the pd/
autogen.sh into zexy/autogen.sh and it works fine in the auto-build
'pd' acccount. Also, on my 10.5 machine, I load Fink using . ". /sw/
bin/init.sh", so the path is prepended, and it still doesn't work, but
with a different error:
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -
I.. -I/Users/hans/code/pure-data.git/src -g -O2 -mms-bitfields -MT
0x260x260x7e.lo -MD -MP -MF .deps/0x260x260x7e.Tpo -c -o
0x260x260x7e.lo 0x260x260x7e.c
../libtool: line 832: X--tag=CC: command not found
../libtool: line 865: libtool: ignoring unknown tag : command not found
../libtool: line 832: X--mode=compile: command not found
../libtool: line 998: *** Warning: inferring the mode of operation is
deprecated.: command not found
../libtool: line 999: *** Future versions of Libtool will require --
mode=MODE be specified.: command not found
../libtool: line 1142: Xgcc: command not found
../libtool: line 1142: X-DHAVE_CONFIG_H: command not found
../libtool: line 1142: X-I.: command not found
../libtool: line 1142: X-I..: command not found
../libtool: line 1142: X-I/Users/hans/code/pure-data.git/src: No such
file or directory
../libtool: line 1142: X-g: command not found
../libtool: line 1142: X-O2: command not found
../libtool: line 1142: X-mms-bitfields: command not found
../libtool: line 1142: X-MT: command not found
../libtool: line 1142: X0x260x260x7e.lo: command not found
../libtool: line 1142: X-MD: command not found
../libtool: line 1142: X-MP: command not found
../libtool: line 1142: X-MF: command not found
../libtool: line 1142: X.deps/0x260x260x7e.Tpo: No such file or
directory
../libtool: line 1142: X-c: command not found
../libtool: line 1193: X0x260x260x7e.lo: command not found
../libtool: line 1198: libtool: compile: cannot determine name of
library object from `': command not found
.hc
----------------------------------------------------------------------------
Mistrust authority - promote decentralization. - the hacker ethic
_______________________________________________
Pd-dev mailing list
[email protected]
http://lists.puredata.info/listinfo/pd-dev
