husk's solution seems a little circuitous. Requiring a whole extra data
protocol. I'd make a copy of the abstraction, and add a group of send boxes to
them (if there aren't some already). Then simply find the parameters you want
to change in the patch you're working on, and place a receive object (with the
corresponding name to the send on the knob, slider or button you want to
assign) above that and use some arithmetic to get to the range you want.
Remember, nanokontrol sends midi control signals, which work from 0 - 127.
Personally I tend to start with [/ 127] (giving you a range of 0 - 1) and then
multiply by the range you want. You could then [+ ] the minimum number of the
resultant range.
Date: Sun, 24 Jan 2010 12:37:03 +0100
From: [email protected]
To: [email protected]
CC: [email protected]
Subject: Re: [PD] how to use a korg nano kontrol with pd
Hi Roberto,
pureKontrol takes the midi signal from the korg and converts it to osc message.
First you have to connect to some host, for example your computer (localhost or
127.0.0.1) into a port (for example 1234), then you can receive the incoming
OSC message. Once you are connected (for exampe to localhost 1234) you can
receive the osc message from korg just creating a [dumpOSC 1234] object in
puredata and print the output.
In order to make it easier you can find a reciver patch inside pureKontrol
directory that comes with a [OSCroute] object that already route all the
incoming messages from pureKontrol. So copy reciver.pd inside particle chamber
and connect route's output to what do you want.
Hope it helps you
suerte
husk
On Sun, Jan 24, 2010 at 11:59 AM, Roberto Duarte <[email protected]>
wrote:
Hello,
Im new with pd. Im trying to use my nano kontrol to control a pd patch,
particle chamber for instance( http://macumbista.net/?page_id=370 ), I just
download 3 different patches or abstractions to do so:
the nanokontrol-panel.pd and nanokontrol (
http://puredata.hurleur.com/sujet-2776-korg-nanokontrol-abstraction ) , and
purekontrol ( http://www.estereotips.net/?page_id=482&lang=ES ) .
I tested all and worked fine, responding to knobs, sliders etc; but what comes
next, how can I connect these patches (or abstractions?) to control thing on
particle chamber or how can I assign sliders or knobs to control it. Do I need
to copy something inside the particle chamber? how do I need to proceed step by
step.
Any help will be appreciated, thanks a lot!!
_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
--
If identity in the Post-modernism is nothing you can call me a
RadikalTeknoFreak Hartivist
www.estereotips.net
qeve.estereotips.net
_________________________________________________________________
Send us your Hotmail stories and be featured in our newsletter
http://clk.atdmt.com/UKM/go/195013117/direct/01/_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
