Hmm the only idea i have is probably that some file isn't in the right place, but I don't know which file nor where it should go. Maybe its the /sw/etc/primesense/Features_1_5_2 folder?
.hc On Mon, Jan 23, 2012, at 23:11, Matthias Kronlachner wrote: > thanks hans, rgb, depth and hand tracking are now working with the fink > version of OpenNI. > but does skeleton work for you? > "NiSimpleSkeleton" > says Find user generator failed: Error! > > the same for pix_openni external. > when i link pix_openni against the openni version i installed manually > skeleton is working. > > with "niReg -l" you can check witch OpenNI modules are registered. > skeleton is showing up but still it's somehow not working. > do you have an idea? > > matthias > > Am 23.01.12 04:04, schrieb Hans-Christoph Steiner: > > > > Ok, I got the NiViewer working on my machine! I checked in an updated > > libusb1 (1.0.9-rc3) into Fink/unstable, and that was the last step to > > getting it working. > > > > .hc > > > > On Jan 22, 2012, at 4:08 PM, Matthias Kronlachner wrote: > > > >> Ah thanks, you have to install sed before trying to install openni. > >> > >> fink install sed > >> and then > >> fink install primesense-nite openni-sensor-avin2-sensorkinect > >> > >> pix_openni compiled successfully against fink version of openni and > >> initialisation is also working for pix_openni. > >> but anyway i don't get an image or depth stream. > >> i will try again tomorrow. > >> > >> it's definitely much more comfortable to install openni, nite and > >> sensorkinect via fink, thanks hans! > >> > >> matthias > >> > >> > >> Am 22.01.12 22:08, schrieb Hans-Christoph Steiner: > >>> > >>> Ah, ok, try this: > >>> > >>> fink install sed primesense-nite openni-sensor-avin2-sensorkinect > >>> > >>> .hc > >>> > >>> On Jan 22, 2012, at 2:04 PM, Matthias Kronlachner wrote: > >>> > >>>> hi hans! > >>>> > >>>> thanks, but installing openni via fink still doesn't work for me. > >>>> i attached the logfile. > >>>> > >>>> i did selfupdate and cleanup before. > >>>> > >>>> does it work for someone else?? > >>>> > >>>> matthias > >>>> > >>>> Am 21.01.12 05:03, schrieb Hans-Christoph Steiner: > >>>>> > >>>>> Another Fink update, I just added the avin2 driver, so now the > >>>>> recommended setup for the Kinect is: > >>>>> > >>>>> fink install primesense-nite openni-sensor-avin2-sensorkinect > >>>>> > >>>>> .hc > >>>>> > >>>>> On Jan 20, 2012, at 7:06 AM, Matthias Kronlachner wrote: > >>>>> > >>>>>> hi! > >>>>>> > >>>>>> i tried to install openni from fink but got an error. > >>>>>> -> see attachment. > >>>>>> > >>>>>> i did fink selfupdate and fink update-all before. > >>>>>> > >>>>>> don't know how to fix that. maybe you can help. > >>>>>> if i can manage to install openni + sensorkinect via fink i will > >>>>>> build it against the package and include it to the install > >>>>>> instructions. > >>>>>> > >>>>>> matthias > >>>>>> > >>>>>> > >>>>>> Am 19.01.12 19:23, schrieb Hans-Christoph Steiner: > >>>>>>> > >>>>>>> This is great, I'm going to try to use this in my Dataflow class > >>>>>>> at ITP/NYU. I'm currently updating the openni/primesense > >>>>>>> packaging for Debian and Ubuntu and am packaging for Mac OS > >>>>>>> X/Fink. It would be awesome if you could try to build against > >>>>>>> the packaging. > >>>>>>> > >>>>>>> (these should be showing up soon) > >>>>>>> http://pdb.finkproject.org/pdb/package.php/openni > >>>>>>> http://pdb.finkproject.org/pdb/package.php/openni-sensor-primesense > >>>>>>> > >>>>>>> I'm pushing my Debian packaging to the git repos on Debian > >>>>>>> pkg-multimedia. As I get things working, I'll post binary > >>>>>>> packages to this PPA: > >>>>>>> > >>>>>>> https://launchpad.net/~eighthave/+archive/openni > >>>>>>> <https://launchpad.net/%7Eeighthave/+archive/openni> > >>>>>>> > >>>>>>> .hc > >>>>>>> > >>>>>>> On Jan 11, 2012, at 8:48 AM, Matthias Kronlachner wrote: > >>>>>>> > >>>>>>>> you're welcome. > >>>>>>>> > >>>>>>>> if you get this issue with permissions to usb device place the > >>>>>>>> udev rule into /etc/udev/rules.d > >>>>>>>> see: > >>>>>>>> https://github.com/OpenKinect/libfreenect/tree/master/platform/linux/udev > >>>>>>>> > >>>>>>>> but it still has this error when using freenect with audio support. > >>>>>>>> so a temporal fix can be > >>>>>>>> sudo chmod 777 /dev/bus/usb/001/026 > >>>>>>>> -> that id changes every time... > >>>>>>>> > >>>>>>>> maybe someone found a way to permanently add the rule... i > >>>>>>>> tried but couldn't manage to get it working without setting the > >>>>>>>> chmod manually. > >>>>>>>> > >>>>>>>> matthias > >>>>>>>> > >>>>>>>> Am 10.01.12 16:21, schrieb olsen: > >>>>>>>>> ej matthias > >>>>>>>>> > >>>>>>>>> vielen dank für diese Externals! > >>>>>>>>> wie hast n du das mit den permissions auf das device geregelt? > >>>>>>>>> ich bekomm als user folgenden errör: > >>>>>>>>> > >>>>>>>>> libusb couldn't open USB device /dev/bus/usb/001/026: > >>>>>>>>> Permission denied. > >>>>>>>>> libusb requires write access to USB device nodes. > >>>>>>>>> libusb couldn't open USB device /dev/bus/usb/001/024: > >>>>>>>>> Permission denied. > >>>>>>>>> libusb requires write access to USB device nodes. > >>>>>>>>> > >>>>>>>>> danks für info & gruss > >>>>>>>>> olsen > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> On 01/09/2012 09:26 AM, Matthias Kronlachner wrote: > >>>>>>>>>> i added a small external that allows to control motor/led of > >>>>>>>>>> Kinect and can output the accelerometer data via libfreenect. > >>>>>>>>>> > >>>>>>>>>> you can use this in combination to pix_openni. > >>>>>>>>>> get it here: > >>>>>>>>>> > >>>>>>>>>> https://github.com/kronihias/freenect > >>>>>>>>>> > >>>>>>>>>> just the audio external with resampling included missing.... > >>>>>>>>>> somebody willing to help? > >>>>>>>>>> > >>>>>>>>>> matthias > >>>>>>>>>> > >>>>>>>>>> Am 09.01.12 07:21, schrieb Budi Prakosa: > >>>>>>>>>>> awesome!! > >>>>>>>>>>> > >>>>>>>>>>> On Mon, Jan 9, 2012 at 8:18 AM, Matthias Kronlachner > >>>>>>>>>>> <[email protected]> wrote: > >>>>>>>>>>>> hello again! > >>>>>>>>>>>> > >>>>>>>>>>>> if you want to use skeleton data and hand tracking (similar > >>>>>>>>>>>> to OSCeleton) > >>>>>>>>>>>> combined with rgb and depth streams from Kinect Sensor you > >>>>>>>>>>>> can do this with > >>>>>>>>>>>> the new pix_openni external. get it here: > >>>>>>>>>>>> > >>>>>>>>>>>> https://github.com/kronihias/pix_openni > >>>>>>>>>>>> > >>>>>>>>>>>> binaries for osx in build folder. > >>>>>>>>>>>> you will need to install OpenNI, NITE and SensorKinect -> > >>>>>>>>>>>> see README > >>>>>>>>>>>> > >>>>>>>>>>>> initialization of openni and nodes needs some time and pd > >>>>>>>>>>>> freezes - keep > >>>>>>>>>>>> that in mind! > >>>>>>>>>>>> i hope it's stable, i haven't tested it excessively now. > >>>>>>>>>>>> > >>>>>>>>>>>> currently it supports just 1 kinect sensor. i don't have > >>>>>>>>>>>> access to two > >>>>>>>>>>>> cameras in the near future so help would be appreciated. > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> matthias > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> Am 05.01.12 09:17, schrieb Matthias Kronlachner: > >>>>>>>>>>>> > >>>>>>>>>>>> hi everybody! > >>>>>>>>>>>> > >>>>>>>>>>>> i did a update to my pix_freenect external for kinect and > >>>>>>>>>>>> moved it into a > >>>>>>>>>>>> git repo. > >>>>>>>>>>>> get it here: http://github.com/kronihias/pix_freenect > >>>>>>>>>>>> > >>>>>>>>>>>> ready to use binaries for osx (including > >>>>>>>>>>>> libusb&libfreenect) are in the > >>>>>>>>>>>> build folder. > >>>>>>>>>>>> > >>>>>>>>>>>> major improvements: > >>>>>>>>>>>> * open specific Kinect sensor by serial number, not only by > >>>>>>>>>>>> id (that may > >>>>>>>>>>>> change every time pd is restarted) – useful for multiple > >>>>>>>>>>>> Kinect > >>>>>>>>>>>> installations > >>>>>>>>>>>> * output registered depthmap -> rgb and depth images are > >>>>>>>>>>>> aligned (less > >>>>>>>>>>>> offset between those two pictures - depending on distance) > >>>>>>>>>>>> * output depthmap directly as millimeter values (16 bit in > >>>>>>>>>>>> red& green > >>>>>>>>>>>> channels) > >>>>>>>>>>>> * resolution of rgb image can be set to 1280×1024 > >>>>>>>>>>>> > >>>>>>>>>>>> i also added a folder with examples - currently just one > >>>>>>>>>>>> but i hope there > >>>>>>>>>>>> will come more soon.... > >>>>>>>>>>>> > >>>>>>>>>>>> have fun. > >>>>>>>>>>>> > >>>>>>>>>>>> matthias > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> _______________________________________________ > >>>>>>>>>>>> [email protected] mailing list > >>>>>>>>>>>> UNSUBSCRIBE and account-management -> > >>>>>>>>>>>> http://lists.puredata.info/listinfo/pd-list > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> _______________________________________________ > >>>>>>>>>>>> [email protected] mailing list > >>>>>>>>>>>> UNSUBSCRIBE and account-management -> > >>>>>>>>>>>> http://lists.puredata.info/listinfo/pd-list > >>>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> _______________________________________________ > >>>>>>>>>> [email protected] mailing list > >>>>>>>>>> UNSUBSCRIBE and account-management -> > >>>>>>>>>> http://lists.puredata.info/listinfo/pd-list > >>>>>>>>>> > >>>>>>>>> > >>>>>>>> > >>>>>>>> _______________________________________________ > >>>>>>>> [email protected] <mailto:[email protected]> mailing list > >>>>>>>> UNSUBSCRIBE and account-management -> > >>>>>>>> http://lists.puredata.info/listinfo/pd-list > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> ---------------------------------------------------------------------------- > >>>>>>> > >>>>>>> Computer science is no more related to the computer than > >>>>>>> astronomy is related to the telescope. -Edsger Dykstra > >>>>>>> > >>>>>>> > >>>>>> > >>>>>> <fink_openni_log.txt> > >>>>> > >>>>> > >>>>> > >>>>> ---------------------------------------------------------------------------- > >>>>> > >>>>> "Making boring techno music is really easy with modern tools, but > >>>>> with live coding, boring techno is much harder." - Chris McCormick > >>>>> > >>>>> > >>>>> > >>>>> > >>>> > >>>> <fink-build-log_openni_1.5.2.23-4_2012.01.22-20.51.48> > >>> > >>> > >>> > >>> > >>> > >>> ---------------------------------------------------------------------------- > >>> > >>> "[T]he greatest purveyor of violence in the world today [is] my own > >>> government." - Martin Luther King, Jr. > >>> > >>> > >>> > >> > > > > > > > > ---------------------------------------------------------------------------- > > > > Mistrust authority - promote decentralization. - the hacker ethic > > > > > > _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
