I can also recommend this very cheap thing here (around 8€): http://www.manhattan-products.com/hi-speed-usb-3-d-sound-adapter https://www.neuhold-elektronik.at/catshop/product_info.php?products_id=4925
(I think both are more or less the same). the latency is quite bad but basically the same as the Behringer UCA202. I used it several interactive installations with the Raspberry Pi 3 where I didn't need ultra low latencies and it worked well. Christof Gesendet: Freitag, 01. September 2017 um 19:38 Uhr Von: "Daniel Iglesia" <[email protected]> An: "Theron Trowbridge" <[email protected]> Cc: "[email protected]" <[email protected]>, "Thomas Grill" <[email protected]> Betreff: Re: [PD] pd on pi zero ? I got smooth audio stereo output (didn't test input) with a Behringer U-Control UCA202 and a pi-zero. I just tried a simple sine wave, I didn't push it to see what happens under load...but now I'm curious to revisit it and see... On Fri, Sep 1, 2017 at 10:16 AM, Theron Trowbridge <[email protected][mailto:[email protected]]> wrote: I would think Pd should work on a zero, though I haven't tried it myself. Miller has some sound card recommendations on the Pd documentation http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0[http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0] in the section "Audio hardware in Linux". I have had good luck with the Griffin Technology iMic with the non-zero Raspberry Pi models - amazon.com/gp/product/B003Y5D776[http://amazon.com/gp/product/B003Y5D776], and I think it's based on one of the chipsets that Miller found worked well. -Theron ^ On Fri, Sep 1, 2017 at 3:51 AM, Thomas Grill <[email protected][mailto:[email protected]]> wrote:Hi Jaime, i have successfully used the PhatDAC and other I2S based dacs. Output-only though! Will report later on trying the audioinjector octo card which is input/output. best, Thomas > Am 31.08.2017 um 04:37 schrieb Jaime Oliver > <[email protected][mailto:[email protected]]>: > > Hello everyone! > > Has anyone tried to use pd on a pi zero and if so, which audio interface did > you use? > > J> _______________________________________________ > [email protected][mailto:[email protected]] mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list] _______________________________________________ [email protected][mailto:[email protected]] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list] _______________________________________________ [email protected][mailto:[email protected]] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list] _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list] _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
