Ah, i forgot... it would be cool for the future to have a buildable package with source included and working build scripts. Don't know when/whether i have the time for that, so if someone wants to stand in, please go for it. best, Thomas
> Am 07.03.2018 um 09:35 schrieb Thomas Grill <g...@grrrr.org>: > > Dear all, > puredata-0.48-1 is now in the PiCore repository! That's a binary build for > tinycorelinux on Raspberry Pi. > http://repo.tinycorelinux.net/9.x/armv6/tcz/ > best, Thomas > > -- > Thomas Grill > http://grrrr.org > > > >> Am 16.02.2018 um 23:58 schrieb Thomas Grill <g...@grrrr.org>: >> >> Dear all, >> i have just submitted picore extension packages for pd-0.48-1 to the >> respective repertory. >> I hope i have met all the requirements, so that the package can become >> canonical very soon. >> >> If you want to install them in the meantime, please grab the files from >> http://l.grrrr.org/puredata_tcz >> The manual installation procedure is the following: >> >> ------- >> >> Copy the package files from your local machine to the tinycore: >> scp $SOURCEDIR/puredata.tcz{,.dep,.md5.txt} >> tc@$TINYCOREIP:/etc/sysconfig/tcedir/optional/ >> >> then logon to the tinycore: >> ssh tc@$TINYCOREIP >> chown tc.staff /etc/sysconfig/tcedir/optional/puredata.tcz* >> chmod 664 /etc/sysconfig/tcedir/optional/puredata.tcz* >> echo puredata.tcz >> /etc/sysconfig/tcedir/onboot.lst >> >> and reboot the tinycore >> >> ------- >> >> These are just the binary files needed to run pd. >> The doc/help files are in the puredata-doc.tcz package, the development >> header m_pd.h is in puredata-dev.tcz . >> To install those permanently, follow the procedure from above with changed >> package names. >> >> best, Thomas >> >> -- >> Thomas Grill >> http://grrrr.org >> >> >> >>> Am 15.02.2018 um 04:22 schrieb Dan Wilcox <danomat...@gmail.com>: >>> >>> Sweet, good to know. I think it would be good if the Pd distribution >>> tarball was built this way so you don't need autoconf/autogen installed to >>> build. >>> >>>> On Feb 15, 2018, at 4:20 AM, Chris McCormick <ch...@mccormick.cx> wrote: >>>> >>>> Hi Dan, >>>> >>>> On 07/02/18 16:50, Dan Wilcox wrote: >>>>> Looks like an issue with autoconf of your system. If we used a dist >>>>> tarball with pregenerated configure scripts, this probably wouldn't be an >>>>> issue since then autoconf and automaker are not needed, just gcc and make. >>>> I followed your instructions to build the dist tarball: >>>> >>>>> ./autogen.sh >>>>> ./configure >>>>> make dist >>>> >>>> Then copied the tarball pd-0.48.1.tgz to the Raspberry Pi running Tiny >>>> Core Linux and ran: >>>> >>>> ./configure >>>> make >>>> >>>> The resulting binary successfully runs a test tone Pd patch and outputs a >>>> sine wave to the audio jack. >>>> >>>> Hope this helps! >>>> >>>> Cheers, >>>> >>>> Chris. >>>> >>>> -- >>>> http://mccormick.cx/ >>> >>> >>> _______________________________________________ >>> Pd-list@lists.iem.at mailing list >>> UNSUBSCRIBE and account-management -> >>> https://lists.puredata.info/listinfo/pd-list >> >
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list