That's how i performed the compilation - the process, including the separation of the results into -bin, -dev and -doc packages should be made reproducible with some scripts. That is the wish of the picore repo keepers. best, Thomas
> Am 07.03.2018 um 15:48 schrieb Dan Wilcox <[email protected]>: > > It should work with makefile.gnu in src. We still need to update the > autotools setup to support the "build in place" approach beyond the halfway > symlinking it does now, so I wouldn't use the configure script et al. in the > package for this yet. > >> On Mar 7, 2018, at 12:34 PM, Thomas Grill <[email protected] >> <mailto:[email protected]>> wrote: >> >> Ah, i forgot... it would be cool for the future to have a buildable package >> with source included and working build scripts. >> Don't know when/whether i have the time for that, so if someone wants to >> stand in, please go for it. >> best, Thomas >> >>> Am 07.03.2018 um 09:35 schrieb Thomas Grill <[email protected] >>> <mailto:[email protected]>>: >>> >>> Dear all, >>> puredata-0.48-1 is now in the PiCore repository! That's a binary build for >>> tinycorelinux on Raspberry Pi. >>> http://repo.tinycorelinux.net/9.x/armv6/tcz/ >>> <http://repo.tinycorelinux.net/9.x/armv6/tcz/> >>> best, Thomas >>> >>> -- >>> Thomas Grill >>> http://grrrr.org >>> >>> >>> >>>> Am 16.02.2018 um 23:58 schrieb Thomas Grill <[email protected]>: >>>> >>>> Dear all, >>>> i have just submitted picore extension packages for pd-0.48-1 to the >>>> respective repertory. >>>> I hope i have met all the requirements, so that the package can become >>>> canonical very soon. >>>> >>>> If you want to install them in the meantime, please grab the files from >>>> http://l.grrrr.org/puredata_tcz >>>> The manual installation procedure is the following: >>>> >>>> ------- >>>> >>>> Copy the package files from your local machine to the tinycore: >>>> scp $SOURCEDIR/puredata.tcz{,.dep,.md5.txt} >>>> tc@$TINYCOREIP:/etc/sysconfig/tcedir/optional/ >>>> >>>> then logon to the tinycore: >>>> ssh tc@$TINYCOREIP >>>> chown tc.staff /etc/sysconfig/tcedir/optional/puredata.tcz* >>>> chmod 664 /etc/sysconfig/tcedir/optional/puredata.tcz* >>>> echo puredata.tcz >> /etc/sysconfig/tcedir/onboot.lst >>>> >>>> and reboot the tinycore >>>> >>>> ------- >>>> >>>> These are just the binary files needed to run pd. >>>> The doc/help files are in the puredata-doc.tcz package, the development >>>> header m_pd.h is in puredata-dev.tcz . >>>> To install those permanently, follow the procedure from above with changed >>>> package names. >>>> >>>> best, Thomas >>>> >>>> -- >>>> Thomas Grill >>>> http://grrrr.org >>>> >>>> >>>> >>>>> Am 15.02.2018 um 04:22 schrieb Dan Wilcox <[email protected]>: >>>>> >>>>> Sweet, good to know. I think it would be good if the Pd distribution >>>>> tarball was built this way so you don't need autoconf/autogen installed >>>>> to build. >>>>> >>>>>> On Feb 15, 2018, at 4:20 AM, Chris McCormick <[email protected]> wrote: >>>>>> >>>>>> Hi Dan, >>>>>> >>>>>> On 07/02/18 16:50, Dan Wilcox wrote: >>>>>>> Looks like an issue with autoconf of your system. If we used a dist >>>>>>> tarball with pregenerated configure scripts, this probably wouldn't be >>>>>>> an issue since then autoconf and automaker are not needed, just gcc and >>>>>>> make. >>>>>> I followed your instructions to build the dist tarball: >>>>>> >>>>>>> ./autogen.sh >>>>>>> ./configure >>>>>>> make dist >>>>>> >>>>>> Then copied the tarball pd-0.48.1.tgz to the Raspberry Pi running Tiny >>>>>> Core Linux and ran: >>>>>> >>>>>> ./configure >>>>>> make >>>>>> >>>>>> The resulting binary successfully runs a test tone Pd patch and outputs >>>>>> a sine wave to the audio jack. >>>>>> >>>>>> Hope this helps! >>>>>> >>>>>> Cheers, >>>>>> >>>>>> Chris. >>>>>> >>>>>> -- >>>>>> http://mccormick.cx/ >>>>> >>>>> >>>>> _______________________________________________ >>>>> [email protected] mailing list >>>>> UNSUBSCRIBE and account-management -> >>>>> https://lists.puredata.info/listinfo/pd-list >>>> >>> >> > > -------- > Dan Wilcox > @danomatika <http://twitter.com/danomatika> > danomatika.com <http://danomatika.com/> > robotcowboy.com <http://robotcowboy.com/> > > >
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
