What if all .pd_linux files are missing? Where can I get them if not by downloading?
Maybe by downloading and compiling the source - but I don't find instructions for that either . . . :-( > -----Original Message----- > From: Pd-list [mailto:[email protected]] On Behalf Of Christof > Ressi > Sent: Sunday, September 12, 2021 10:15 AM > To: Pd-List > Subject: Re: [PD] external libraries for Raspberry Pi - how to compile? > > I'm 100% sure that this is just a matter of correctly loading iemlib, see my > other post. Other people have been using iemlib on the RPi without > problems. > > Don't worry :-) > > On 12.09.2021 03:36, Ingo wrote: > > I'm aware of the fact that pretty much anything can be replaced. > > For compatibility reasons I have to stick with Pd 0.49, though . . . > > > > My dilemma is that I have written over 13 years on this software. It's huge. > > Finding and replacing all objects that don't work anymore will take me > > at least several months doing nothing else. > > Without iemlib and iemgui working nothing even loads for starting up > > the software. > > This stuff had been written more than 10 years ago and I used whatever > > was working at this time. > > > > The very first errors I get are > > > > iemlib/splitfilename > > couldn't create > > > > mergefilename > > ... couldn't create > > > > Then loading stops already at less than 1% of the software being loaded. > > If I don't get any further I'm stuck. iemlib objects are all over the > > software with thousands of abstractions. > > > > When I install iemlib with "apt-get install pd-iemlib" it installs > > that patches and help files but all the .pd_linux files are missing. > > Same thing with Deken. So, none of the objects are created. > > > > > > The only way to get this running is by compiling the last non working > > libraries - mainly iemlib for now to get some loading at all. > > Then I can go ahead and replace or fix things. > > > > However, I have never compiled any libraries before - I don't even > > know whether iemlib can be compiled on the RPi at all. > > Should be possible, though since there is a version on Deken - it just > > doesn't work here. > > > > It's a brand-new operating system and I don't know which softwares to > > install for compiling and there are next to zero instructions on the > > iemlib source code. > > > > I cannot find any detailed and - more important - complete > > instructions for generally compiling libraries. > > All instructions assume that I already know how to compile libraries > > and that I have installed all needed software. > > But it's a brand new system with NOTHING is installed. > > And even worse I have no idea what to do if anything goes wrong or if > > nothing at all happens. > > > > If someone can point me to general instruction or a compiled version > > of iemlib for the RPi I'd be extremely grateful ! > > > > Thanks > > Ingo > > > > > > > > > >> -----Original Message----- > >> From: Pd-list [mailto:[email protected]] On Behalf Of > >> [email protected] > >> Sent: Saturday, September 11, 2021 3:39 PM > >> To: [email protected] > >> Subject: Re: [PD] external libraries for Raspberry Pi - how to compile? > >> > >> > >> > >> Am 11. September 2021 15:12:04 MESZ schrieb Ingo > >> <[email protected]>: > >>> Thanks, IOhannes! > >>> > >>> Using apt-get took care of most except for iemgui, moocow and toxy. > >>> > >> What exact objects do you need from those ? > >> > >>> > >>> iemlib is as always incomplete! > >> That's strange. I recall it being complete the last time i used a Pi... > >> > >> I. e. some objects don?t create like e.g. > >>> [mergefilename], [stripfilename], [splitfilename], etc. > >>> > >> With recent PD versions you don't need an object like [mergefilename] > >> anymore. You can do basically anything with simple combinations of > >> [symbol] [pack] [list] and messages. > >> > >> Also have a look at the HCS library. That should cover your needs ! > >> > >> Best > >> > >> Oliver > >> > >> -- > >> > >> Gesendet von meiner Gurkn > >> > >> > >> > >> > >> _______________________________________________ > >> [email protected] mailing list > >> UNSUBSCRIBE and account-management -> > >> https://lists.puredata.info/listinfo/pd-list > > > > > > > > > > _______________________________________________ > > [email protected] mailing list > > UNSUBSCRIBE and account-management -> > > https://lists.puredata.info/listinfo/pd-list > > > > _______________________________________________ > [email protected] mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
