OK, I have downloaded the iemlib from Deken.
The iemlib from Deken (iemlib[v1.22] (Linux-armv7-32).dek is in one single folder called "iemlib". The file "iemlib.pd_linux" is inside of the folder. I have tried these options: [declare -lib iemlib] [declare -lib iemlib -path iemlib] [declare -lib iemlib -path /usr/lib/puredata/extra/iemlib] [declare -path iemlib] [declare -path /usr/lib/puredata/extra/iemlib] Still none of the objects create. What would be the correct way to declare the library? What am I doing wrong? Thank you! Ingo > -----Original Message----- > From: Ingo [mailto:[email protected]] > Sent: Sunday, September 12, 2021 10:20 AM > To: 'Christof Ressi'; 'Pd-List' > Subject: RE: [PD] external libraries for Raspberry Pi - how to compile? > > What if all .pd_linux files are missing? > Where can I get them if not by downloading? > > Maybe by downloading and compiling the source - but I don't find > instructions for that either . . . :-( > > > > -----Original Message----- > > From: Pd-list [mailto:[email protected]] On Behalf Of > > Christof Ressi > > Sent: Sunday, September 12, 2021 10:15 AM > > To: Pd-List > > Subject: Re: [PD] external libraries for Raspberry Pi - how to compile? > > > > I'm 100% sure that this is just a matter of correctly loading iemlib, > > see my other post. Other people have been using iemlib on the RPi > > without problems. > > > > Don't worry :-) > > > > On 12.09.2021 03:36, Ingo wrote: > > > I'm aware of the fact that pretty much anything can be replaced. > > > For compatibility reasons I have to stick with Pd 0.49, though . . . > > > > > > My dilemma is that I have written over 13 years on this software. It's > huge. > > > Finding and replacing all objects that don't work anymore will take > > > me at least several months doing nothing else. > > > Without iemlib and iemgui working nothing even loads for starting up > > > the software. > > > This stuff had been written more than 10 years ago and I used > > > whatever was working at this time. > > > > > > The very first errors I get are > > > > > > iemlib/splitfilename > > > couldn't create > > > > > > mergefilename > > > ... couldn't create > > > > > > Then loading stops already at less than 1% of the software being loaded. > > > If I don't get any further I'm stuck. iemlib objects are all over > > > the software with thousands of abstractions. > > > > > > When I install iemlib with "apt-get install pd-iemlib" it installs > > > that patches and help files but all the .pd_linux files are missing. > > > Same thing with Deken. So, none of the objects are created. > > > > > > > > > The only way to get this running is by compiling the last non > > > working libraries - mainly iemlib for now to get some loading at all. > > > Then I can go ahead and replace or fix things. > > > > > > However, I have never compiled any libraries before - I don't even > > > know whether iemlib can be compiled on the RPi at all. > > > Should be possible, though since there is a version on Deken - it > > > just doesn't work here. > > > > > > It's a brand-new operating system and I don't know which softwares > > > to install for compiling and there are next to zero instructions on > > > the iemlib source code. > > > > > > I cannot find any detailed and - more important - complete > > > instructions for generally compiling libraries. > > > All instructions assume that I already know how to compile libraries > > > and that I have installed all needed software. > > > But it's a brand new system with NOTHING is installed. > > > And even worse I have no idea what to do if anything goes wrong or > > > if nothing at all happens. > > > > > > If someone can point me to general instruction or a compiled version > > > of iemlib for the RPi I'd be extremely grateful ! > > > > > > Thanks > > > Ingo > > > > > > > > > > > > > > >> -----Original Message----- > > >> From: Pd-list [mailto:[email protected]] On Behalf Of > > >> [email protected] > > >> Sent: Saturday, September 11, 2021 3:39 PM > > >> To: [email protected] > > >> Subject: Re: [PD] external libraries for Raspberry Pi - how to compile? > > >> > > >> > > >> > > >> Am 11. September 2021 15:12:04 MESZ schrieb Ingo > > >> <[email protected]>: > > >>> Thanks, IOhannes! > > >>> > > >>> Using apt-get took care of most except for iemgui, moocow and toxy. > > >>> > > >> What exact objects do you need from those ? > > >> > > >>> > > >>> iemlib is as always incomplete! > > >> That's strange. I recall it being complete the last time i used a Pi... > > >> > > >> I. e. some objects don?t create like e.g. > > >>> [mergefilename], [stripfilename], [splitfilename], etc. > > >>> > > >> With recent PD versions you don't need an object like > > >> [mergefilename] anymore. You can do basically anything with simple > > >> combinations of [symbol] [pack] [list] and messages. > > >> > > >> Also have a look at the HCS library. That should cover your needs ! > > >> > > >> Best > > >> > > >> Oliver > > >> > > >> -- > > >> > > >> Gesendet von meiner Gurkn > > >> > > >> > > >> > > >> > > >> _______________________________________________ > > >> [email protected] mailing list > > >> UNSUBSCRIBE and account-management -> > > >> https://lists.puredata.info/listinfo/pd-list > > > > > > > > > > > > > > > _______________________________________________ > > > [email protected] mailing list > > > UNSUBSCRIBE and account-management -> > > > https://lists.puredata.info/listinfo/pd-list > > > > > > > > _______________________________________________ > > [email protected] mailing list > > UNSUBSCRIBE and account-management -> > > https://lists.puredata.info/listinfo/pd-list _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
