Alan wrote: > Hello all, I have had two Z-1p (one was sold few years ago) and both have > had this problem. When the lens was at 'A' and set the aperture through the > camera, the actual aperture (visual observation by firing the shutter) would > be slightly larger than the one set by the aperture ring phyically (on some > lenses). Here are the differences that I have observed. I've never noticed that problem. However, theres no secret that adjusting apertures from the body is never as accurate as setting it on the lens. However, I have noticed discrepancies in aperture display on the Z-1p when the lens is not set at "A". The camera seem unable to display the correct aperture one stop from wide open but instead display it as wide open. Eg. an F:4 max aperture lens set at F:5.6 is displayed as F:4. Exposure is correct though. Pål - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
