Hi, I'm after a bit of clarification as to how Pentax Function 10 works on the MZ-S, before I send mine off for repair.
PF 10 controls how the popup flash will behave when used in wireless mode. The manual says: ++ During wireless operation you can set the built in flash to function as a flash or wireless controller. Pentax Function No 10 Setting No [1] Sets the built in flash to operate as a flash. [2] Sets the built in flash to operate as a wireless flash controller. Memo If the built in flash is used as a wireless flash controller, the preflash emitted by the built in flash unit does not affect the exposure, only to transmit the exposure information to the wireless flash. ++ The problem is that I am getting reflections from the the popup flash when I have PF 10 set to 2, and I don't think this should be happening (and I know for sure the reflections are from the built in flash because I have one slide with a perfect reflection of 3 flashes reflected in the glass). For those who have played with wireless flash please let me know what you think. Leon http://www.bluering.org.au http://www.bluering.org.au/leon
