That is probably normal. What should change is shutter speed. Bill
----- Original Message ----- From: "Frits Wüthrich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 09, 2004 5:04 PM Subject: Re: version 1.1 > I assume the update is only for MSMC-M and SMC lenses, not for A > If you want to use the lens off the A position, you need to set that in > the menu. AT least in V1.00, I assume that didn't change. > > On Fri, 2004-01-09 at 22:59, Tom Lesser wrote: > > >Now, with the lens off "A", putting the camera into manual and pressing the > > >green button will give the "correct" shutter speed. > > > > I've just installed v1.1 and have tried several A lenses in "off A" > > apertures and when I press the green button in Manual, all I get is > > a flashing "Av--" in the LCD panel. In fact, I get the flashing > > "Av--" whether the mode is set to P, Tv, Av, M or B. Any help out > > there? > > > > Yes, the upgrade installation appears to have been successful ... > > when I hold down the Menu button and switch the camera ON, its says > > Version 1.1. > > > > Thanks. > > > > Tom Lesser > -- > Frits Wüthrich <[EMAIL PROTECTED]> > >