Well I've taken the front group out and there is 3 screws in there, but I thought it just held the front barrel to the rear section, there is also 3 around the body of the focus section when you remove the rubber brip part.
Why would there be three? Would I just loosen them all and adjust and retighten? --- Alan Chan <[EMAIL PROTECTED]> wrote: > Since I don't have this lens, I cannot give precise > procedure. For fixed > focal length lens, the focus setting screws (usually > 3) can be accessed from > the front (might need to remove some barrels first), > or underneath the > rubber depends on the design. It has nothing to do > with the lens mount. > > Alan Chan > http://www.pbase.com/wlachan > > > Hi guys I have a new to me k200mm 2.5 lens thats > >working great except its infinity focus is a bit > off. > > > > > > I've already took the mount off and unscrewed the > >front element group to try to get at the adjustment > >but I'm not seeing anything. Maybe I'm just blind. > > > > So has anyone adjusted one or at least have any > >ideas? > > _________________________________________________________________ > Add photos to your e-mail with MSN Premium. Get 2 > months FREE* > http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines > > __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail
