The Nikon compatibility thing is a myth. When they first went to internal meters they just added a coupling fork to the existing lenses, and you could have one added to your old lens. That started the compatibility myth. When they went to Auto-Indexed lenses for program exposure your old lenses could not be made to work in auto mode. The latest lenses have no aperture ring and will not work on older cameras (and vis versa for the low-end cameras).

The old EPO pro service that made Nikon the preeminent photojournalist's camera has been gone for decades also, as least since Nikon took over the US marketing. Once someone learns something they think that never changes (especially with those who do not actually use the knowledge), but it does, it does.

graywolf
http://www.graywolfphoto.com
"Idiot Proof" <==> "Expert Proof"
-----------------------------------


Peter Loveday wrote:
Unfortunately, Nikon dropped the aperture simulator on its all non-pro
bodies, including the cheaper DSLRs (D100,D70). So you can mount a
lens on D100 or D70 with an aperture ring, but you won't get any
metering. For that, you would have to buy the expensive pro DSLRs (D1
D2). Or hack the lens adding the chip with contacts, then it works.
There is not even a "green button" solution, so there Pentax is
better.


Hmm interesting. Unfortunately this is impossible with pre-A pentax lenses due to the non-linear motion of the aperture lever.

I assume, then, that Nikon lenses have always operated the same way as far as this goes (be it linear or non-linear?

Love, Light and Peace,
- Peter Loveday
Director of Development, eyeon Software





--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.4 - Release Date: 1/25/2005



Reply via email to