Hmmm...
I've noticed that the meter lock button, while lighting the adjoining LED
properly, doesn't actually stop the meter in the viewfinder from moving, nor
does it lock in the shutter speed when I finally press the shutter release.
Is this correct operation?
Thanks,
Gerald
----- Original Message -----
From: "James Apilado" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 17, 2001 10:01 PM
Subject: Re: Motor Drive MD est arrive
> The problem I had with my DMD was that when I pushed down gently on the
> shutter release the meter would not stay in the "On" position. I took it
in
> to a local shop that is an authorize repair facility for Pentax and they
> CLA'd it for $125.00, but that was a few years ago.
> Also, I took in an ESII but they refused to take it. Essex Camera Repair
in
> New Jersey accepted it and refurbished it.
> Jim A.
>
> > From: "Gerald Cermak" <[EMAIL PROTECTED]>
> > Reply-To: [EMAIL PROTECTED]
> > Date: Thu, 17 May 2001 18:04:44 -0700
> > To: <[EMAIL PROTECTED]>
> > Subject: Motor Drive MD est arrive
> >
> > My Motor Driver MD for the K2DMD I picked up a couple of weeks ago has
> > arrived. What a solid piece of equipment! The MD is nearly mint
> > cosmetically, no info yet on mechanics.
> >
> > However, my lowly K2DMD has seen better days, and is in need of thorough
> > CLA - i.e. the shutter release pin for the winder binds internally and
won't
> > retract after plunged into the body.
> >
> > Are there any quirks about a CLA for a K2DMD that I should be aware of?
I'm
> > assuming my normal repair shop has probably never seen one of these.
> >
> > Thanks,
> > Gerald
> >
> > -
> > This message is from the Pentax-Discuss Mail List. To unsubscribe,
> > go to http://www.pdml.net and follow the directions. Don't forget to
> > visit the Pentax Users' Gallery at http://pug.komkon.org .
> >
> >
>
> -
> This message is from the Pentax-Discuss Mail List. To unsubscribe,
> go to http://www.pdml.net and follow the directions. Don't forget to
> visit the Pentax Users' Gallery at http://pug.komkon.org .
>
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
