Dave Try to install: SSC service utility, which will enable powerfull head celaning: www.ssclg.com as well as restting ink counters, which makes i s possible to install cleaning cartridges and later shift to (half used) ink caartridges. Regards Jens
G'day PDML'ers After a year of not being satisfied with my prints, I sat down last Sunday and read everything I could find on the subject of colour management. Long story short, success, I am now able to produce consistent, if not perfect, results. But... I've now got problems with blue lines running through all my prints: http://tinyurl.com/9ub3b I've run the head cleaning utility so many times I've used half an ink cartridge. The nozzle check pattern always comes out clear. The banding lessens if I make enough prints, but never really clears up. I suspect the problem is caused by a clogged print head (please correct me if I'm wrong). I'm using an Epson Stylus Photo 935. As most no doubt know, unlike Canon & HP inkjet printers the print head isn't removable, so fixing the problem isn't all that simple. So my question is. Who on the list has had similar problems? Were you able to clear it, and if so, how did you do it? Thanks in advance. Dave Jens Bladt mailto:[EMAIL PROTECTED] http://hjem.get2net.dk/bladt
