Yeah sure, unfortunately....

2005/6/4, Graywolf <[EMAIL PROTECTED]>:
> Are you sure you did not format as NTFS? Has to be Win16 or Win32, I think.
> 
> graywolf
> http://www.graywolfphoto.com
> "Idiot Proof" <==> "Expert Proof"
> -----------------------------------
> 
> 
> Thibouille wrote:
> > Well, both my 512MB Toshiba cards did work well enough. I did the
> > upgrade to 1.12.
> > Then after a while 1 went "not formated" and then the second one.
> >
> > I can format as I want with my card reader, no problem.
> > If I connect the D to the PC I can't access the card (of course it is
> > supposed not to be formated) but I CAN'T format from there. Progress
> > bar goes as usual and then something like "Windows couldn't format the
> > drive".
> >
> > Well... :(
> >
> > ----------------------
> > Thibouille
> > ----------------------
> > *ist-D,Z1,SuperA,KX,MX and KR-10x ...
> >
> >
> >
> > 2005/6/4, Paul Stenquist <[EMAIL PROTECTED]>:
> >
> >>The upgrade shouldn't be a problem. Did you use the card to transfer
> >>the files? Did everything work okay at that time? My first *istD
> >>wouldn't recognize any cards out of the box.  I had to return it.
> >>Haven't had any problems since. Try another card to see if the camera
> >>is at fault. If you only have one, you're eventually going to need a
> >>second card anyway. You can pick up a half gig card for less than fifty
> >>US over here, so it shouldn't be too costly. If you have the same
> >>problem with a second card, return the camera. The vendor should be
> >>willing to replace it, since it's new. I had no problems with B&H.
> >>Paul
> >>On Jun 4, 2005, at 7:39 AM, Thibouille wrote:
> >>
> >>
> >>>Doesn't work.
> >>>It reads and formats without problem under WinXP.
> >>>Then put it into the camera. Tells me it is not formated and refuse to
> >>>format it itself.
> >>>
> >>>Weird.
> >>>
> >>>I should note I immediately did the upgrade to 1.12 firmware. Would it
> >>>be a source of problem ?
> >>>
> >>>2005/6/4, Frantisek <[EMAIL PROTECTED]>:
> >>>
> >>>>Which card?
> >>>>
> >>>>Does it read on PC?
> >>>>
> >>>>Try formatting it on the PC (as FAT16 if it's <=2GB card, as FAT32 if
> >>>>it's 2GB+ card! Not NTFS or Mac or whatever).
> >>>>
> >>>>If it works:
> >>>>
> >>>>Then, use some software that scans the "surface" for read/write
> >>>>errors.
> >>>>
> >>>>Then, format it in the camera again.
> >>>>
> >>>>Hope this helps...
> >>>>
> >>>>Good light!
> >>>>           fra
> >>>>
> >>>>
> >>>
> >>>
> >>>--
> >>>----------------------
> >>>Thibouille
> >>>----------------------
> >>>*ist-D,Z1,SuperA,KX,MX and KR-10x ...
> >>>
> >>
> >>
> >
> >
> 
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.1 - Release Date: 6/3/2005
> 
> 


-- 
----------------------
Thibouille
----------------------
*ist-D,Z1,SuperA,KX,MX and KR-10x ...

Reply via email to