If it's anything like the ZX-M, it's painfully easy. This works for the
ZX-M: Take the lens off the camera, and at the front of the focus screen
there is a gap in the metal frame that holds it in. Stick a small screw
driver, tweezers, dental tool, etc. in there, and gently pull towards you.
The metal frame will unhook, allowing you to drop and clean the focus
screen. Reverse the process to put the screen back in the camera.
Todd
At 02:05 PM 6/20/01, you wrote:
>
>I seem to have gotten a little speck of dust/dirt
>on the top side of my ZX5n focusing screen. Its
>really annoying through the finder. On my LX,
>there's a hinged door that drops down so you can
>change/clean the focusing screen. Does anyone
>know if the screen on the ZX5n can be removed
>w/o damaging the camera? It looks similar, but I
>don't think there's a hinge like the LX.
>
>thanks!
>
>
>-
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
