Bill wrote:
> This sounds odd. The Z-1p definitely uses distance information as do all
> the PZ/Z series cameras. That is how they manage the auto-zoom size
> tracking. Perhaps there may be a problem in making good contact between
> your 600/4 and your MZ-S. Besides, none of these cameras should be using
> the distance info for focusing as that would make it difficult for them to
> focus any F series lenses since they do not carry any kind of distance
> information. But...who knows....
Are you sure the Z-series use distance info for focusing? I don't really know; it was
just a theory.
In addition, the front lens tube on my 600/4 is "loose". The three screws holding it
is apparently broken possibly due to the endles jamming and consequent wriggling of
the incredibly stupid threaded lens hood.
Anyway, my theory is that the camera do get distance information but get wrong
information because the lens is out of alignment. If its not the lens then it must be
the camera.....
P�l
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
