Excellent shot. Yes, that's obviously the boundary fringing that doesn't respond to CA correction. Godfrey's method of color blending sounds interesting. Or you could probably paint over that edge on a 400% blowup. I'd also burn in the highlight a bit. Paul
> Hi Paul, > > I tried that with no luck. Here's the pic in question. Note the temple > piece of the woman's eye glasses: > > http://home.earthlink.net/~scbelinkoff/wob_test.html > > Shel > > > [Original Message] > > From: Paul Stenquist > > > Sometimes it's a result of red and blue chromatic aberration. If so, > > you can correct it reasonably well by going to the "lens" tab in the > > RAW converter and adjusting the CA sliders. At other times it seems to > > be the result of backlight on dark objects, such as branches against a > > sky and doesn't seem to be affected much by CA adustment. I find this > > effect is more common to some lenses than others. In situations where > > it was important to remove the fringe and CA adjustment yields little > > improvement, I've occasionally resorted to cloning it out after masking > > or selecting the appropriate area. Lots of work, but it can be done > > effectively. > > > On Sep 21, 2005, at 6:48 AM, Shel Belinkoff wrote: > > > > > Any suggestions on how to rid an image of purple fringing ... > >
