---- Begin Included Message ----
Subject: film or camera revisited
Sorry for the first post:Bad url try this one
Dave
About a month ago i posted a thread on a problem i was
having with a camera,at that time only with Fuji film,
with 1-2 frames showing a light leak or proccess problem.
I have just got back a roll of Kodak Max 400 and now have
the same problem with this film, however i have scanned
the print and is on my photo.net site at the url below
http://www.photo.net/photodb/folder?folder_id=112301
I'd appreciate if you could look at the print and give
me your best thoughts as to if it looks like a
light leak or process problem.The flaw shows up on the negative
and seems to be a mostly mid roll-end roll.I have looked at the foam
and 'seems ' ok.This camera had a small fall from camera bag onto
floor of truck in May and was ok before this fall..Also while poking
around this morning i knocked the little metal tab off that looks
like it helps guide the film at the tack up spool.It seems to have
been attached at factory's end with contact cement on 3 little
plastic stubs.Would this be glueable by a lay man or should the
whole thing go in for a look see.
Thanks in advance
Dave
Pentax User
Stouffville Ont Canada
Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail
-
This message is from the Pentax-Discuss Mail List. �To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
---- End Included Message ----
Pentax User
Stouffville Ont Canada
Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
