My guess is still with light leak, but I cannot fathom why it is only
showing up at the end of the roll.
--
Blessings,
Nick
----------
>From: "David J Brooks" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Fwd: film or camera revisited
>Date: Fri, Jul 20, 2001, 7:58 AM
>
> ---- Begin Included Message ----
>
> Subject: film or camera revisited
>
> Sorry for the first post:Bad url try this one
>
> Dave
>
>
> About a month ago i posted a thread on a problem i was
> having with a camera,at that time only with Fuji film,
> with 1-2 frames showing a light leak or proccess problem.
> I have just got back a roll of Kodak Max 400 and now have
> the same problem with this film, however i have scanned
> the print and is on my photo.net site at the url below
>
>
> http://www.photo.net/photodb/folder?folder_id=112301
>
>
> I'd appreciate if you could look at the print and give
> me your best thoughts as to if it looks like a
> light leak or process problem.The flaw shows up on the negative
> and seems to be a mostly mid roll-end roll.I have looked at the foam
> and 'seems ' ok.This camera had a small fall from camera bag onto
> floor of truck in May and was ok before this fall..Also while poking
> around this morning i knocked the little metal tab off that looks
> like it helps guide the film at the tack up spool.It seems to have
> been attached at factory's end with contact cement on 3 little
> plastic stubs.Would this be glueable by a lay man or should the
> whole thing go in for a look see.
>
> Thanks in advance
>
> Dave
>
>
> Pentax User
> Stouffville Ont Canada
> Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail
> -
> This message is from the Pentax-Discuss Mail List. �To unsubscribe,
> go to http://www.pdml.net and follow the directions. Don't forget to
> visit the Pentax Users' Gallery at http://pug.komkon.org .
>
>
>
> ---- End Included Message ----
>
>
>
>
> Pentax User
> Stouffville Ont Canada
> Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail
> -
> This message is from the Pentax-Discuss Mail List. To unsubscribe,
> go to http://www.pdml.net and follow the directions. Don't forget to
> visit the Pentax Users' Gallery at http://pug.komkon.org .
>
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
