Hi Pål,
Have you turned off "fast printing" in the driver?
If not, that could be one thing to try.
To do this, you must set the colour adjustment mode ("main" tab in
"print settings"; "utskriftsinnstillinger" if your Windows is in
Norwegian). Change the setting to "custom", then click "advanced...",
and remove the ticks for "high speed" and "edge smoothing".
hth,
Jostein
----- Original Message -----
From: "Pål Jensen" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, November 19, 2005 5:03 PM
Subject: Problems with Epson R2400
I seem to be unable to get decent prints from my brand new Epson
R2400 printer. There are stripes a few millimeters apart on all
prints. I've made sure that the right paper type is selected (I use
Epson glossy photo paper). I've gone through all the various head
cleaning precedures. The tests show everything is OK but the prints
still turn out with stripes. The right printer driver is installed.
The colors are dead on accurate with no adjustments needed (I thought
this would be the biggest hassle).
Any ideas?
Pål
