>...Seriously, it was recurring problems with all of the labs I worked with, >including some expensive >pro labs...
I've had just the opposite experience Although I've mainly shot slide film (only about 99.9% of my non business images) for 35+years, - many of those years I'd shoot hundreds of 36 exp rolls- I've had only one screw up during the processing - most processing was of the mail out type. It occurred during the processing of several rolls taken with my then new Spotmatic, on my honeymoon. Somehow a few of those rolls got mixed up with someone taking semi-nude photos of a female subject. Never did get some of the honeymoon rolls. Also for 18 years, on my job, I was taking 10 to 15 rolls of print film each week (forensic evidence) and never had an issue with those rolls during processing, even tho we normally used the lowest cost processor. Kenneth Waller http://tinyurl.com/272u2f ----- Original Message ----- From: <[EMAIL PROTECTED]> Subject: Re: Sensor cleaning > And then it gets trashed in the lab:-). Seriously, it was recurring > problems with all of the labs I worked with, including some expensive pro > labs, that led me to make the leap to the dark side. > Paul > -------------- Original message ---------------------- > From: "Bob Blakely" <[EMAIL PROTECTED]> >> From: "Paul Stenquist" <[EMAIL PROTECTED]> >> >> > Film is much harder to clean than a sensor. >> > Paul >> >> Yes, it is, but you get a new, fresh, brushed (thanks to the design of >> the >> can) sensor for each shot. Further, as it rolls onto the takeup reel, it >> protects itself. >> >> Regards, >> Bob... -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
